Skip to content

Good night · 17 November, Tuesday

5° Drizzle
USD 50.39 ▲0.22 EUR 55.50 ▼0.19 GBP 66.63 ▼0.03 CHF 60.14 ▼0.18

#ESXi-Host

Nothing has been shared on this topic yet. Be the first to share an idea!

Comments (0)

No comments yet. Be the first to comment.

Sign in to write a comment.

ESXi Server: Setup and Management Guide

An ESXi host is the physical server on which virtualization is built. Installed directly on the hardware, this setup lets you run multiple virtual servers on a single machine. Whether you're thinking of a small home lab or a test environment at work, the essence is the same: good planning up front prevents a lot of headaches later.

Get clear before you install

Moving forward without knowing how much of your hardware you can dedicate to this leads to decisions that are hard to undo later. Answer these three questions:

Read more
  • How many virtual servers will you run, and what is their total memory requirement?
  • How do you plan to divide the disk space; will data and system be separate?
  • Do you need to access the machine remotely over the network?

These answers determine both your hardware choice and the settings during installation.

What to watch for on the hardware and network side

Because ESXi takes direct ownership of the hardware, compatibility is the most critical issue. Make sure the motherboard, disk controller and network card you'll use support virtualization. Memory bottlenecks more often than processor cores; if you're planning several virtual servers, be generous with memory.

On the network side, the most common mistake is putting the management interface on the same network as the virtual servers. Using a separate network, or at least a separate port, for management makes things easier in terms of both security and accessibility. Protecting the server against power outages shouldn't be forgotten either; sudden shutdowns are a risk to disk integrity.

Storage and backup

Starting with local disks is the easiest route, but as you grow, network-based storage options come into play. Whichever method you choose, make it a habit to track how full your storage is. Virtual disks grow faster than you expect, and when space runs out, machines grinding to a halt is all too easy.

There's only one rule when it comes to backup: the backup must not live where the virtual machine runs. If the host fails, you can't reach a backup on the same disk. Even a simple external disk or a separate network location greatly reduces this risk.

Habits for everyday use

  • Use a strong password for access to the management interface and enable two-step verification if possible.
  • Test updates in a test environment; don't apply them directly to a production machine.
  • Try a new configuration on a single virtual machine first.
  • Check the host's resource usage now and then; values that stay persistently high are a sign of trouble ahead.
  • Keep installation notes. Months later, you'll want to remember which setting you changed and why.

A small roadmap for beginners

Start with a single machine, set up a few unimportant virtual servers on it, and try out networking, storage and taking backups in this safe environment. When you feel comfortable, add a second machine and get used to the idea of redundancy. Fixing the problems of a rushed installation is always more tiring than proceeding calmly from the start.